Skip to Content

How to Make a Bungee Cord Bracelet

The following is a guest post from our friends at I Spy DIY.

While in the fashion closet at work last week, I came across these fun bungee cord bracelets, and of course I was inspired to make my own! With a quick trip to Home Depot I found the supplies for a couple of dollars. I am a fan of wearing a stack OR the other night, when I had some friends over, I made one for each (including a guy friend!) and they have been wearing solo.

This post may contain affiliate links*
Materials for Bungee Cord Bracelets

Supplies: Compression sleeve and bungee cords from Home Depot, Super glue and lighter.

Step 1 Bungee Cord Bracelet

Cut off both ends of the bungee cord. Measure so the bracelet is a little larger then your wrist. The bungee will stretch a bit but allow some room.

Step 2 Bungee Cord Bracelet

Save this

Enter your email below and I'll email this post to you!

Keep the ends from from unraveling by waving a lighter over them

Step 3 Bungee Cord Bracelet

Put the compression sleeve on the end and superglue the inside.

Step 4 Bungee Cord Bracelet

Join the two ends under the compression sleeve, and hold for at least a minute. Fill in gaps with more superglue, to secure. Let dry.

Shaina (SOL REPUBLIC)

Tuesday 1st of November 2011

So simple, and so edge-y. Great for boys & girls and an awesome gift idea!

Comments are closed.